So fresh and so clean…

As the weather gets warmer across the nation, homeowners everywhere are looking to achieve crystal clear waters, with as little labor as possible. Pool maintenance isn’t always pretty (algae anyone?). Fear not; with a few basic must-haves, your pool will sparkle with minimal effort and maximum results- all summer long.

Backyard pool maintenance has never been easier!

#yesafilter: Waterco’s

MultiCyclone 12 Centrifugal Filter

An Australian innovation, the MultiCyclone is a pre-filtration device, which is designed to capture up to 80% of the incoming dirt load prior to the main filter, which then significantly reduces filter maintenance and saves backwash water – not to mention improves water circulation. Waterco’s award winning MultiCyclone is a brilliant pre-filtration device that works on the basis of centrifugal water filtration and is designed with no moving parts and no filter media to clean or replace.

Why we love it:

• Eases filter workload:

  MultiCyclone pre-filters up to 80% of the filter’s incoming dirt load easing the workload of the swimming pool filter. As the MultiCyclone intercepts more and more dirt, the flow rate remains unchanged.

• Minimizes backwash frequency

  The installation of a MultiCyclone as a pre-filter to a sand filter can reduce its backwash frequency to once per year, resulting in a saving of up to 7,000 litres of water per year for an average domestic sized swimming pool.

• Minimizes cartridge cleaning and replacement

  The installation of a MultiCyclone as a pre-filter to a cartridge filter can reduce filter cartridge cleaning and replacement to once per swimming season and even up to once per year, depending on the size of the cartridge filter.

• Simple maintenance

  The MultiCyclone is easily cleaned by opening its purge valve. Only 15 litres of water is discharged to cleanse the MultiCyclone.

  
  *Waterco stocks a range MultiCyclones, all of which come with a two year warranty.

Get a“pump start”: Pool Care by Danner Manufacturing

The 6MSP Utility/Pool Pump is a powerful, durable, oil-free pump that can remove water down to 1/8 of an inch. With a max flow rate of 1900 GPH, it can quickly remove water from swimming pools and pool covers. It can also efficiently remove water from a variety of common and emergency de-watering applications such as flooded basements, rooftops or anywhere that de-watering is a must.

Why we love it:

• Fits inside most pool bottoms and 8" main drains

• Comes complete with adapters for a standard garden hose (3/4") and pool vacuum hose fittings (1 1/2").

• Lightweight

• Pumps Down to 1 ⁄8"

• Fits In a 8" Main Drain and Most Pool Bottom Drains

• Sturdy, Integrated Carry Handle

• Completely Submersible

• Removable Screened Inlet

• High Impact Thermoplastic Housing

• 1/6 HP Oil-Free Motor with Thermal Protection

• 25' Cord with Strain Relief

• 1 Year Limited Warranty

Keepin’ it reel: FeherGuard Above Ground Reels

Covering your backyard pool keeps the debris out and heat in. A quality reel will make uncovering your pool a simple and quick process without the fuss. Designed for above ground pools without full decking, Feherguard’s revolutionary new Surface Rider Reel Systems, roll up the solar blanket as it 'rides' on the surface of the water. This design allows for an easy one-person operation, portability, and performance.

*The Surface Rider is designed to fit most above ground pools 8'7" to 34' (2.6m to 10.3m) diameter, while the Surface Rider II fits tubular rail pools of the same dimensions.

Why we love it:

• No pool attachment required.

• Unique end designs makes the reel completely portable.

• Complete system lifts off, leaving the pool top clear.

• Special swivel feature allows for easy movement during removal.

Kit em’ up: Maintenance made easy!

Poolmaster’s Maintenance Kit Collections offer a generous selection of performance and built-to-last products made from resilient components designed to keep your pool sparkling. The Vinyl Pool Maintenance Kit includes a selection of 6 maintenance tools. Featuring a 18″ ABS brush with Polypropylene bristles, leaf skimmer with mar-proof Polypropylene frame and scoop-front design, deluxe-weighted vacuum with oval shaped body and perimeter Polypropylene bristles, 3-way test kit that tests for chlorine, bromine, and pH and comes complete in case with test block, 1/2oz. OTO/ Phenol Red solutions and front/back readings, residential thermometer with cord for hanging, and set of 2 pole hanger brackets.

Why we love it:

• Includes everything you’ll need to get started to test and maintain your pool water.

• Standard maintenance kits ship in a convenient and plain corrugated box. 

•  Fully Customizable!

  • Build a custom pool or spa maintenance kit by choosing products from our inventory of quality products by consulting with your sales representative on pricing and special packaging options!

  • Suitcase-style white corrugated boxes are available as an upgraded option.